JUSTIFICATION OF THE CHOICE OF THE MOST EFFECTIVE TECHNOLOGICAL WAY TO RESTORE THE HEALTH OF THE CAMSHAFTS
Abstract
The article describes the options for the use of various ways to restore the performance of worn working surfaces of camshafts during the complex repair work. A comparative analysis of the technical and economic efficiency of the considered methods is carried out and the most suitable analysis by the criterion of technological effectiveness of use and ensuring the level of reliability and operability of the restored working surfaces of parts and their spatial geometry, reasonably chosen method of repair is identified.
References
1. Zorin V.A. Remont dorozhnyh mashin, avtomobilej i traktorov (Repair of road machinery, trucks and tractors), Moscow, Akademiya, 2010, 504 p.
2. Karagodin V.I., Mitrohin N.N. Remont mashin i dvigatelej (Repair of cars and engines), Moscow, Masterstvo, Vysshaya shkola, 2012, 496 p.
3. Golovin S.F. Tekhnicheskij servis transportnyh mashin i oborudovaniya (Technical service of transport machines and equipment), Moscow, Al'fa-M, INFRA-A, 2008, 288 p.
4. Tekhnologiya mashinostroeniya, proizvodstvo i remont pod"emno- transportnyh, stroitel'nyh i dorozhnyh mashin (Engineering technology, production and repair of lifting, construction and road machines), Moscow, Akademiya, 2010, 568 p.
5. Ovchinnikov V.V. Chastichno mekhanizirovannaya svarka (naplavka) v zashchitnom gaze (Partially mechanized welding (surfacing) in shielding gas), Moscow, Knorus, 2019, 200 p.
6. Dvigateli CUMMINS ISF3.8 (modifikacii Evro-3, Evro-4, Evro-5). Rukovodstvo po remontu i tekhnicheskomu obsluzhivaniyu (Cummins ISF3 engines.8 (modifications Euro-3, Euro-4, Euro-5). Repair and maintenance manual), Moscow, Legion Avtodata, 2016.
7. Holderman D.D., Mitchell Ch.D. Avtomobil'nye dvigateli: teoriya i tekhnicheskoe obsluzhivanie (Automobile engines: theory and maintenance), Moscow, St. Petersburg, Kiev, 2006, 595 p.
8. URL: http://mash-xxl.info/
9. URL: http://www.tehnoplazma.ru/
10. Grigor'yanc A.G., Shiganov I.N., Misyurov A.I. Tekhnologicheskie processy lazernoj obrabotki (Technological processes of laser processing), Moscow, MGTU im. N.E. Baumana, 2008.
11. URL: http://inethub.olvi.net.ua/ftp/library/share/homelib/spec120/
12. URL: http://mash-xxl.info/page/027115223167019202039227248250203161018026208132/
Review
Views:
372
