ASSESSMENT OF THE POSSIBILITY OF USING ADDITIVE TECHNOLOGIES AND FORMED PROPERTIES OF PCM IN SCIENTIFIC RESEARCH
Abstract
This article discusses the possibility of reducing economic and time costs in the organization and conduct of scientific research using advances in 3-D technologies and the formation of the necessary properties of polymer composite materials by introducing additives that provide the necessary properties. The article also discusses the technological and production factors that affect not only the quality of the resulting silicone mold, but also the quality, or rather the accuracy of the geometric parameters of the casting itself.
References
1. Павлов, А.П. Методы обеспечения эффективности работоспособности 3d-принтеров в производственных условиях/ А.П Павлов, Е.В. Полухин // Ремонт. Восстановление. Модернизация. - 2017. - № 3. - С. 16-20.
2. URL: http://volgograd2.artesk.ru/poleznaya-informatsiya_redyctor.html (дата обращения 20.05.20).
3. [URL: http://reductor58.ru/library/konstruirovanie-korpusa-reductora (дата обращения 21.05.20).
4. URL: http://www.geogips.ru/news/kak_vybrat_silicon/ (дата обращения 01.06.20)
Review
Views:
349
