ASSESSMENT OF POSSIBILITY OF REPLACING THE METAL PARTS OF THE ENGINE OF THE CAR TO THE PARTS FROM POLYMER COMPOSITION MATERIALS

As part of the study and student exchange program between European institutions of higher education in Parma, Italy, under the Erasmus + program.

During the period of study, the Russian student was the initial material of the discipline “Material Mechanics and Structural Integrity [1]”. The ABAQUS software was mastered, which allows analyzing design structures, evaluating new functionality, and modeling technological processes. Were obtained laboratory tests of samples obtained in the laboratory of the University of Parma, Italy. After processing and analyzing the results, conclusions were drawn about the possibilities of using the tested materials for the production and repair of car parts and components, for example, for inserts of a crankshaft of an internal combustion engine.

structural analysis, deformation, laboratory tests, materials mechanics, stress, functional evaluation, modeling, PCM, software, rupture, stretching, fatigue resistance, technological process, structural integrity, abaqus, gom correlate

1. Kokcharov I., Burov A. Structural Integrity Analysis, Amazon Digital Services LLC, 2013, 438 p.

2. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials; Designation: D 3039/D 3039M – 00, 2012, 51 p.

3. Feraboli P., Cleveland T., Ciccu M., Stickler P., DeOto L. Defect and damage analysis of advanced discontinuous carbon/epoxy composite materials, 2010, 15 p.

4. Kompozity polimernye. Proizvodstvo plastin pryamym pressovaniem prepregov i premiksov dlya izgotovleniya obrazcov dlya ispytanij, GOST 33367-2015 (Polymer composites. Production of plates by direct pressing of prepregs and premixes for production of samples for tests, State Standard 33367-2015), Moscow, Izdatel'stvo standartov, 2017, 14 p.

5. Feraboli P., Cleveland T., Ciccu M., Stickler P., Halpin J. Stochastic laminate analogy for simulating the variability in modulus of discontinuous composite materials, 2010, 14 p.

6. Metod ispytaniya na rastyazhenie, GOST 14236-81 (Tensile test method, State Standard 14236), Moscow, Gosudarstvennyj komitet po standartam, 1981, 17 p.

7. Raschety i ispytaniya na prochnost', GOST 25.602-80 (Calculations and strength tests, State Standard 25.602-80), Moscow, Izdatel'stvo standartov, 1981, 15 p.