Improvement of the method for studying the working process of an engine with spark ignition and direct injection of gasoline into the cylinder
Abstract
The article examines the relevance of using modeling of the working process of an engine with spark ignition and direct injection of gasoline into the cylinder. The purpose of this work is to improve the method for studying the working process of an engine with spark ignition and direct injection of gasoline into the cylinder. Experimental studies were conducted using a software and computational complex to verify models and obtain dependencies. A comparison of experimental data and calculations showed a good level of convergence between the model and the experiment, which confirms the accuracy of the model and the obtained dependencies.
About the Authors
Yan S. Tsapurin
MADI
Russian Federation
Russian Federation
student
Andrey M. Petrov
MADI
Russian Federation
Russian Federation
postgraduate
Dmitry S. Konyushkov
MADI
Russian Federation
Russian Federation
postgraduate
Andrey U. Dunin
MADI
Russian Federation
Russian Federation
Doctor of Sciences (Technical), associate professor
References
1. Internal Combustion Engines. In 3 books. Book 1. Theory of Working Processes: Textbook for Universities/ V.N. Lukanin, K.A. Morozov, A.S. Khachiyan, etc.; edited by V.N. Lukanin and M.G. Shatrov. – 4th edition, revised. – Moscow: Higher School, 2010. – 479 p.
2. Internal Combustion Engines. In 3 books. Book 2. Dynamics and Design: Textbook for Universities/ V.N. Lukanin, I.V. Alekseev, M.G. Shatrov, etc.; edited by V.N. Lukanin and M.G. Shatrov. – 4th edition, revised. – Moscow: Higher School, 2009. – 400 p.
3. Internal Combustion Engines. In 3 books. Book 3. Computer Workshop. Modeling of Processes in Internal Combustion Engines: Textbook for Higher Education Institutions/ V.N. Lukanin, M.G. Shatrov, T.Yu. Krichevskaya, et al.; edited by V.N. Lukanin and M.G. Shatrov. – 3rd edition, revised. – Moscow: Vysshaya Shkola, 2007. – 414 p.
4. Automotive Engines: Course Design: Textbook. manual / M.G. Shatrov [et al.]; edited by M.G. Shatrov. – Moscow: Publishing Center “Akademiya”, 2011. – 256 p.
5. Kuleshov A.S. Development of calculation methods and optimization of internal combustion engine working processes. Dis. dok. tehn. nauk. – M.: Bauman MSTU, 2011. – 236 p.
6. Bolotov. P.O. Calculation and experimental determination of heat release parameters in the cylinder of the engine with spark ignition. Bauman MSTU, Moscow, Russian Federation. 2018. 12p.
7. Andrey Viktorovich Kozlov, Alexander Vasilyevich Gontyurev. Experimental study of reducing regulated harmful emissions with exhaust gases of inflatable gasoline engines with direct fuel injection. Scientific article UDC 621.43. 2018. 18p.
8. Kapustin Alexander Vasilyevich, Chumakov Valery Leonidovich, Devyanin Sergey Nikolaevich, Zhorobekov Bolotbek Astaevich, Mathematical modeling of detonation in spark-ignition engines. 2023. 9 p.
9. VOLKSWAGEN AG, Wolfsburg. Self-study program 443. TSI 1.2 L 77 kW turbocharged engine. Structure and principle of operation. 2017. 36 p.
10. Averyanov, A.S., Krivosheev, A.S., Sokolov, V.A. Development of a methodology for studying the working process of an engine with spark ignition and direct fuel injection: Monograph. Moscow: Bauman Moscow State Technical University, 2017. 230 p.
Review
Рецензент: Г.Г. Тер-Мкртичьян, д-р техн. наук, доц., МАДИ
Views:
14
JATS XML
